Study on element detection and its correction in iron ore concentrate based on a prompt gamma-neutron activation analysis system

A prompt gamma-neutron activation analysis(PGNAA) system was developed to detect the iron content of iron ore concentrate. Because of the self-absorption effect of gamma-rays and neutrons, and the interference of chlorine in the neutron field, the linear relationship between the iron analytical coefficient and total iron content was poor, increasing the error in the quantitative analysis. To solve this problem, gamma-ray self-absorption compensation and a neutron field correction algorithm were proposed, and the experimental results have been corrected using this algorithm. The results show that the linear relationship between the iron analytical coefficient and total iron content was considerably improved after the correction. The linear correlation coefficients reached 0.99 or more.     

Effect of Molybdenum on the Microstructure and Oxidation Behavior of Hot-Pressed TaCr2 Alloys

Metal Science and Heat Treatment - Influence of molybdenum additions on the microstructure and corrosion resistance of powder alloys based on the TaCr2 Laves phase is studied. The phase composition...     

Microstructure and damage evolution of SiCf/PyC/SiC and SiCf/BN/SiC mini-composites: A synchrotron X-ray computed microtomography study

SiC_f/PyC/SiC and SiC_f/BN/SiC mini-composites comprising single tow SiC fibre-reinforced SiC with chemical vapor deposited PyC or BN interface layers are fabricated. The microstructure evolutions of the mini-composite samples as the oxidation temperature increases (oxidation at 1000, 1200, 1400, and 1600?°C in air for 2?h) are observed by scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction characterization methods. The damage evolution for each component of the as-fabricated SiC_f/SiC composites (SiC fibre, PyC/BN interface, SiC matrix, and mesophase) is mapped as a three-dimensional (3D) image and quantified with X-ray computed tomography. The mechanical performance of the composites is investigated via tensile tests.The results reveal that tensile failure occurs after the delamination and fibre pull-out in the SiC_f/PyC/SiC composites due to the volatilization of the PyC interface at high temperatures in the air environment. Meanwhile, the gaps between the fibres and matrix lead to rapid oxidation and crack propagation from the SiC matrix to SiC fibre, resulting in the failure of the SiC_f/PyC/SiC composites as the oxidation temperature increases to 1600?°C. On the other hand, the oxidation products of B₂O₃ molten compounds (reacted from the BN interface) fill up the fracture, cracks, and voids in the SiC matrix, providing excellent strength retention at elevated oxidation temperatures. Moreover, under the protection of B₂O₃, the SiC_f/BN/SiC mini-composites show a nearly intact microstructure of the SiC fibre, a low void growth rate from the matrix to fibre, and inhibition of new void formation and the SiO₂ grain growth from room to high temperatures. This work provides guidance for predicting the service life of SiC_f/PyC/SiC and SiC_f/BN/SiC composite materials, and is fundamental for establishing multiscale damage models on a local scale.     

Synthesis and Preliminary Evaluation of 11C-Labeled VU0467485/AZ13713945 and Its Analogues for Imaging Muscarinic Acetylcholine Receptor Subtype 4

Muscarinic acetylcholine receptors (mAChRs) have five distinct subunits (M₁–M₅) and are involved in the action of the neurotransmitter acetylcholine in the central and peripheral nervous system. Attributed to the promising clinical efficacy of xanomeline, an M₁/M₄-preferring agonist, in patients of schizophrenia and Alzheimer's disease, M₁- or M₄-selective mAChR modulators have been developed that target the topographically distinct allosteric sites. Herein we report the synthesis and preliminary evaluation of ¹¹C-labeled positron emission tomography (PET) ligands based on a validated M₄R positive allosteric modulator VU0467485 (AZ13713945) to facilitate drug discovery. [¹¹C]VU0467485 and two other ligands were prepared in high radiochemical yields (>30 %, decay-corrected) with high radiochemical purity (>99 %) and high molar activity (>74 GBq μmol⁻¹). In vitro autoradiography studies indicated that these three ligands possess moderate-to-high in vitro specific binding to M₄R. Nevertheless, further physiochemical property optimization is necessary to overcome the challenges associated with limited brain permeability.     

Dual-activator luminescence of LuAG:Mn4+/Tb3+ phosphor for optical thermometry

Mn⁴⁺ and Tb³⁺ singly doped and Mn⁴⁺/Tb³⁺ codoped lutetium aluminum garnet (Lu₃Al₅O₁₂, or simply LuAG) phosphors were synthesized and investigated for the application of optical thermometry. X-ray powder diffraction and luminescence spectroscopy measurements were performed on all samples to analyze their crystal phases and optical properties. In particular, temperature-dependent luminescence of the LuAG:Mn⁴⁺/Tb³⁺ sample was measured at the temperature range of 270–420 K. The results showed that the luminescence intensity of Mn⁴⁺ has gone through a remarkable decline while the luminescence of Tb³⁺ has an only insignificant change with the rise of temperature which leads to a dramatic decrease in the fluorescence intensity ratio (FIR) between the two activator Mn⁴⁺ and Tb³⁺. Further analysis showed that the LuAG:Mn⁴⁺/Tb³⁺ sample used for temperature sensing has a high relative sensitivity with maximum value of 4.3% K⁻¹ at 333 K. Our research indicated that this LuAG:Mn⁴⁺/Tb³⁺ material is a promising candidate for FIR-type optical temperature sensing.     

Evaluation of physiological workload assessment methods using heart rate and accelerometry for a smart wearable system

Work metabolism (WM) can be accurately estimated by oxygen consumption (VO₂), which is commonly assessed by heart rate (HR) in field studies. However, the VO₂–HR relationship is influenced by individual capacity and activity characteristics. The purpose of this study was to evaluate three models for estimating WM compared with indirect calorimetry, during simulated work activities. The techniques were: the HR-Flex model; HR branched model, combining HR with hip-worn accelerometers (ACC); and HR?+?arm-leg ACC model, combining HR with wrist- and thigh-worn ACC. Twelve participants performed five simulated work activities and three submaximal tests. The HR?+?arm-leg ACC model had the overall best performance with limits of agreement (LoA) of ?3.94 and 2.00?mL/min/kg, while the HR-Flex model had ?5.01 and 5.36?mL/min/kg and the branched model, ?6.71 and 1.52?mL/min/kg. In conclusion, the HR?+?arm-leg ACC model should, when feasible, be preferred in wearable systems for WM estimation.

Practitioner Summary: Work with high energy demand can impair employees’ health and life quality. Three models were evaluated for estimating work metabolism during simulated tasks. The model combining heart rate, wrist- and thigh-worn accelerometers showed the best accuracy. This is, when feasible, suggested for wearable systems to assess work metabolism.     

Learning Discriminative Aggregation Network for Video-Based Face Recognition and Person Re-identification

International Journal of Computer Vision - In this paper, we propose a discriminative aggregation network method for video-based face recognition and person re-identification, which aims to...     

A superposition method of reflected wave for moving string vibration with nonclassical boundary

A reflected wave superposition method is proposed for an axially traveling string with classical and nonclassical boundaries, based on the reflection of the propagating wave on both sides of the string, combining its initial conditions and the continuity conditions in order to obtain the expressions for the reflected wave. The reflection process, in three phases, is deduced and a determinate expression for the transverse vibration is obtained. The correctness and superiority of the proposed method is verified by comparison with the Newmark-β method for an axially moving string with a fixed and a spring-dashpot boundary.     

高功率光纤激光器光纤器件封装应力影响研究

高功率激光器无源器件制作过程中封装不当引入的应力,会导致信号光光束质量劣化和光纤温升,为了解决此问题,理论分析了光纤形变对信号光模式分布的影响,利用有限元方法建立包层光导致光纤发热模型,实验研究了不同封装方式对光纤发热情况和信号光光束质量的影响。实验表明,应力导致的光纤形变会造成信号光M2值在受力方向上略微变小而其垂直方向上变大,在输出100 W信号光时,施加应力导致的M2值的变化最高为0.39,与仿真结果相符。在光纤温升方面,相比于使用硬质胶水带来的12 ℃温升,使用硅橡胶封装的剥离器将温升控制在5 ℃以内,且其封装应力引入的M2值的变化在0.05以内。     

A Novel Approach for Bisphosphonates: Ionic Liquids and Organic Salts from Zoledronic Acid

Novel ionic liquids and organic salts based on mono- or dianionic zoledronate and protonated superbases, choline and n-alkylmethylimidazolium cations, were prepared and characterized by spectroscopic and thermal analyses. Most of the prepared salts display amorphous structures and very high solubility in water and saline solutions, especially the dianionic salts. Among the zoledronate-based ionic compounds, those containing choline [Ch] and methoxyethylmethylimidazolium [C₃OMIM] cations appear to have significant cytotoxicity against human osteosarcoma cells (MG63) and low toxicity toward healthy skin fibroblast cells. Because osteosarcoma is a bone pathology characterized by an increase in bone turnover rate, the results presented herein may be a promising starting point for the development of new ionic pharmaceutical drugs against osteosarcoma.